- Trusted Shops certified
Basement waterproofing: take a targeted approach to damp surfaces.
The wall remains damp, the next coat of paint has been postponed and the shelves are still in the way. Turn the unresolved basement problem into a clearly defined task. Thor Protect is intended for treating suitable mineral surfaces affected by penetrating moisture. Clarify the requirements, understand the system and choose the material for your actual treatment area – from a limited test to the right kit.
The basement problem becomes a specific surface treatment
As long as it is unclear which material belongs on the wall and how much is needed, the work remains undone. Thor Protect offers a defined treatment approach for suitable mineral surfaces: primer and finisher are applied one after the other according to the instructions for the chosen kit. This allows you to focus your project on a specific area and the components intended for it.
The primer forms the first part of the treatment, followed by the finisher according to the instructions. Supplementary sealing powder is an option for the small cracks described there. Preparation is part of the process: make the surface accessible and absorbent, remove loose and barrier-forming layers according to the instructions and protect sensitive surfaces from splashes.
Have the appropriate instructions to hand before you begin. The number of applications and waiting times depend on the chosen kit. Observe the protective measures, particularly for skin and eyes. A brief overview does not replace these application instructions.
Order for your substrate, not just for the visible patch
First check what lies beneath paint or plaster. The manufacturer’s documentation lists stone, concrete, screed, masonry, and lime and cement plaster as suitable mineral substrates. An appropriately prepared, absorbent surface is a prerequisite. Thor Protect is intended here for penetrating moisture.
There is no corresponding waterproofing approval for gypsum and plasterboard. For cold wall areas or condensation, the appropriate measure and product must be clarified before selection. The base system is not a proven solution for thermal bridges or every cause of damp.
Measure the planned treatment area, including the required margins. A visible patch is not automatically the area for which you need material. Agree on the specific execution before ordering. This allows you to choose the kit according to your project rather than solely by the size of the discolouration.
Choose the purchase option that suits your area
You do not automatically have to start with the largest kit. Decide between a limited trial treatment, material for a smaller job and the Complete Kit with accessories. The agreed treatment area is what matters, not just the visibly damaged area.
1 m² Test Kit: start on a limited area
Use the Test Kit for a localised trial treatment on a suitable substrate. It contains primer and finisher for a test area of approximately 1 m² according to the instructions. The result at this spot is not proof that the entire wall or cause of the damp has been treated. For a small complete job, the required margin area must also fit within the quantity planning.
Base Kit: material for your smaller job
Base Kits for 2.5 or 5 m² with primer and finisher are available for an agreed smaller treatment area. Sealing powder is optional. Choose the variant to suit the required area and observe the consumption guidance. A suitable small job can be your entire project; moving on to a large kit later is not a must.
Complete Kit: choose components and accessories together
For projects of 15 m² or more, the Complete Kit offers the convenient option with primer, finisher, sealing powder and accessories. Choose it when the suitable larger treatment area has been established and you want to order the intended contents together. Check the specific variant and included accessories on the product page.
The product pages show the respective variants, current prices and contents. If questions about the substrate or area remain, clarify them via the contact option before purchasing.
Explore the question that is still holding up your basement project
Alongside choosing a kit, consider how you plan to use your basement and which questions remain about the affected surfaces. The topics below help you organise your project. Substrate and system suitability still need to be checked.
Plan to use the basement in everyday life again
Whether for clear storage space or a workspace: start with the use that the damp surface has so far prevented.
- Storage in a damp basement
- Workshop in a damp basement
Assess visible changes on the wall
Flaking paint, white deposits or a single damp corner raise different questions. Consider the visible signs without treating them alone as proof of the cause.
- Paint peeling in the basement
- White deposits on the basement wall
- Damp corner in the basement
Define the project when buying, maintaining an older building or selling
The decision also depends on whether you have just taken over a house, are maintaining an older building or are preparing a sale. These topics belong in the planning, without a product purchase replacing structural or legal considerations.
- Damp basement after buying a house
- Damp basement in an older building
- Selling a house with a damp basement
Clarify access, DIY work and unresolved damp questions
Include access from inside, preparation for DIY work and any continuing dampness in your planning. Clarify these project questions before choosing materials.
- Waterproofing a basement from the inside
- DIY basement waterproofing
- The basement stays damp
The essentials before you buy.
Which basement surfaces is Thor Protect intended for?
The manufacturer's documentation lists suitable mineral substrates such as stone, concrete, screed, masonry, and lime and cement plaster affected by penetrating moisture. The surface must be appropriately prepared and absorbent. This source material does not provide waterproofing approval for gypsum and plasterboard.
Which kit suits a small area?
The 1 m² Test Kit is available for a limited trial treatment. Base Kits for 2.5 or 5 m² with primer and finisher are available for agreed smaller treatment areas; sealing powder is optional. The required total area, including margins, and the consumption guidance are the deciding factors. A small purchase does not have to be the start of a later large kit purchase.
Is the Test Kit enough for a visible patch of 1 m²?
This cannot be determined from the size of the visible patch alone. The treatment area includes required margins; absorbency also affects consumption. The kit is described as a limited test for approximately 1 m². Agree on the actual area before ordering. A local test does not prove complete remediation.
What is the difference between the Base Kit and the Complete Kit?
The Base Kit contains primer and finisher; sealing powder is optional. For areas of 15 m² or more, the Complete Kit is the purchase option with primer, finisher, sealing powder and accessories. Choose according to the treatment area and desired contents. You can find the specific variants and included accessories on the respective product pages.
Does the base system also help with condensation and thermal bridges?
The documentation evaluated contains no appropriate evidence of the base system's effectiveness for this purpose. Distinguish penetrating moisture from condensation or cold wall areas and clarify the measure and product before buying. A damp patch alone does not imply a recommendation for the Base Kit.
What do I need to consider before application and further work?
Prepare a clean, accessible and absorbent surface and remove loose or barrier-forming layers according to the instructions. Protect sensitive surfaces as well as skin and eyes. Primer and finisher follow the process for the chosen kit. The time before further work depends on the substrate and moisture condition; follow the instructions rather than a blanket drying period.
Relevant information for your project
Turn the unresolved task into the right material choice
Once the cause, substrate and treatment area have been clarified, choose your kit. Start with a limited trial treatment or buy the material for your agreed area straight away. The Base Kit covers the smaller purchase option; the Complete Kit brings together components and accessories for larger projects.
If the area has not yet been reliably established, discuss your project before ordering. This keeps the decision focused on your basement rather than on a blanket promise for every damp problem.